Home   |   About Us   |   Parts Request   |   Contact Us MY ACCOUNT | BASKET - 0 item(s)
 

 
Standard Retrofit Single Action/ Wood Double Hung Windows
Standard Retrofit Single Action/ Wood Double Hung Windows

 

Please Choose:

Quantity:
Sale Price:
$39.99
   
 
Standard Retrofit Single Action/ Wood Double Hung Windows

This limit control device Angel Ventlock can be mounted on the Top Sash of any Double Hung window. This is and aftermarket Window Opening Control Device that fits into the stile of the top sash to restrict the bottom sash from opening no more than 4 Inches. These sash locks are single action. Installing one on each side of the frame ensures compliance with the code ASTM F2090-2008 and 2010.

White / Packaged with Screws & Sold in Pairs (RH Shown).

Measure the window gap between the Top sash and the Bottom sash and select your part number.

Made of stamped steel, with stainless steel pin and spring.

Call for Discounts on Larger Quantities. 1-888-219-8387

The CodeASTM F2090-2008 AND 2010

Window manufacturers are determined to do everything possible to prevent these tragedies happening to families across our nation. The new code, ASTM F2090-2008 and 2010, is the result of window industries' efforts to save lives, by improving window safety through organizations such as the Window Safety Task Force of the National Safety Council.

 Across the world, falls account for over half of all domestic accidents involving children and constitute the second most common cause of accidental death in children after road accidents. In the United States, falls from windows account for an estimated 12 deaths and 4,000 injuries among children under 10 years of age every year.

This specification establishes the installation, safety, performance, and labeling requirements for devices intended to address the risk of injury and death associated with accidental falls from windows by children five years old and younger.

WINDOW OPERATION

When opening control devices or window fall prevention screens are properly engaged, the window opening must be less than 4 inches. Release Mechanism - No tools or special knowledge for emergency escape Window opening control devices must have release

NO INTERFERENCE WITH THE INTEGRITY OF WINDOWS

When opening control devices or window fall prevention screens are properly engaged, the window opening must be less than 4 inches. Release Mechanism - No tools or special knowledge for emergency escape Window opening control devices must have release

INSTRUCTIONS / WARNINGS

Each aftermarket window opening control device, when sold, must include installation instructions, operating instructions and safety information in the packaging.

WEATHER

The emergency escape release mechanism must operate properly under all reasonably foreseeable operating - and weather conditions.

RELEASE MECHANISM

To protect against the unintentional operation by a young child, the emergency escape release mechanism must be operated either by two independent single actions or by one dual action.

The sash and the release mechanism needs to operate independently of each other.

EMERGENCY RELEASE

The emergency escape release mechanism must be clearly visible so that it can be used in an emergency situation without impediment.

RESET

After the window opening control device is released, it must automatically reset when the window sash is fully closed.

FORCE NEEDED

The force required to release the emergency escape mechanism should not exceed 
15 lbf (66N).

TESTING YOUR DEVICE

Window opening control devices must be tested and need to meet all requirements in accordance with Section 8b.

OTHER

Window opening control devices and emergency escape release mechanisms must not prevent the window unit from complying with applicable code requirements for minimum opening size.

 

 

 
 
 
 
 
Comodo SSL Seal
Copyright 2012. All rights reserved
Garage Door Parts USA
Home   |   About Us   |   Parts Request   |   Contact Us
eStart Your Web Store with Zen Cart(tm)